Geka Ironworkerswww.geka-ironworkers.com
1
7001
Share

Pumas Series,  hydraulic ironworkers with 5 power settings.

The GEKA universal hydraulic punching machines have been designed by experienced technicians, assisted by powerful CAD CAM equipment and adapted to the ongoing suggestions of over 60,000 users of GEKA shears and ironworkers.

Because of these studies and our commitment to continuous quality improvement, GEKA ironworkers boast unique specs that make them tough machines capable of meeting all production needs.

 

geka punzonadoras hidraulicas puma

  • Technically dimensioned bed.
  • Cylinder with additional guide.
  • Strong and accurate shaft system to avoid distortions.
  • Gradual centering of punch.
  • Quick punch change.
  • Safety protection.
  • Ample space for mounting special equipment.
  • Optimum operation speed.
  • Large number of optional, standard and special accessories to perform a wide range of jobs.
  • Range of punching machines from 55 Tn to 220 Tn with punching throats

 

info
Angles UPN profile Flat bars H profile
Centering Punching

<< see in inches
FEATURES PUMA 55
Punching Power 550 kN
° through thickness ° 40x10 mm
Throat depth 500 mm
750 mm
Maximum stroke 60 mm
Strokes per minute 37
FEATURES PUMA 80
Punching Power 800 kN
° through thickness ° 40x14 mm
Throat depth 510 mm
750 mm
Maximum stroke 70 mm
Strokes per minute 40
FEATURES PUMA 110
Punching Power 1100 kN
° through thickness ° 40x20 mm
Throat depth 500 mm
750 mm
Maximum stroke 80 mm.
Strokes per minute 28
FEATURES PUMA 165
Punching Power 1650 kN
° through thickness ° 40x30 mm
Throat depth 510 mm
760 mm
Maximum stroke 100 mm
Strokes per minute 28
FEATURES PUMA 220
Punching Power 2200 kN
° through thickness ě 40x40 mm
Throat depth 510 mm
800 mm
Maximum stroke 100 mm
Strokes per minute 25
<< see in mm
FEATURES PUMA 55
Punching Power 60 tons
° through thickness ě 1-1/2" x 3/8"
Throat depth 19" x 5/8"
29 1/2"
Maximum stroke 2 3/8"
Strokes per minute 37
FEATURES PUMA 80
Punching Power 88 tons
° through thickness ě 1-1/2" x 9/16"
Throat depth 20"
29 1/2"
Maximum stroke 2 3/4"
Strokes per minute 40
FEATURES PUMA 110
Punching Power 120 tons
° through thickness ě 1-1/2" x 3/4"
Throat depth 19" x 5/8"
29 1/2"
Maximum stroke 3-5/32"
Strokes per minute 28
FEATURES PUMA 165
Punching Power 185 tons
° through thickness ě 1 1/2" x 1 1/4"
Throat depth 20"
29 7/8"
Maximum stroke 3-15/16"
Strokes per minute 28
FEATURES PUMA 220
Punching Power 220 tons
° through thickness ě 1 1/2" x 1 1/2"
Throat depth 20"
31 1/2"
Maximum stroke 3-15/16"
Strokes per minute 25

Capacities based on a material resistance of 65,000 tensile

FULL SPECIFICATIONS

<< see in inches
HIDRAULIC PUNCHING MACHINES     PUMA-55 PUMA-80 PUMA-110 PUMA-165 PUMA-220
PUNCHING              
Punching power   kN 550 800 1100 1650 2200
Maximum capacity   mm ° 40x10 ° 40x14 ° 40x20 ° 40x30 ° 40x40
Throat S mm 500 510 500 510 510
  SD mm 750 750 750 760 800
PUNCHING OF SECTIONS WITH GOOSENECK DIE HOLDER              
I on the leg   mm 100-300 100-300 100-450 100-450 100-450
I on the web   mm 100-500 100-500 100-500 120-500 120-500
U on the leg   mm 100-300 100-300 120-400 120-400 120-400
U on the web   mm 120-260 120-380 120-400 120-400 120-400
GENERAL FEATURES              
Motor power   kW 5 9 9 15 20
Strokes per minute
(based on 20 mm stroke)
    37 40 28 28 1-1/4"
Maximum stroke   mm 60 70 80 100 100
Woeking height S/SD mm 1060/810 1094/1194 991/1066 1060/1060 1013/1013
Net weight S/SD Kg 1150/1885 1715/2115 3150/3970 4290/4525 5200/5500
Gross weight S/SD Kg 1320/2100 1925/2350 3400/4300 4700/5000 5700/6000
Volume S/SD m3 3,63/4,17 4,53/5,87 5,55/6,82 7,31/8,95 9,63/10
Dimensions with seaworthy packaging   S 1,55x1,2x1,95 1,7x1,3x2,05 2,08x1,3x2,05 2,03x1,6x2,25 2,56x1,6x2,35
    SD 1,93x1,2x1,8 2,1x1,3x2,15 2,28x1,3x2,3 2,03x1,6x2,35 2,66x1,6x2,35
OPTIONAL EQUIPMENT              
Tube notching   mm 60 60 60 60 60
Oversize diameters punching equipment   ° mm 100x4 100x6 100x8 100x 12 100x16
<< see in mm
HIDRAULIC PUNCHING MACHINES     PUMA-55 PUMA-80 PUMA-110 PUMA-165 PUMA-220
PUNCHING              
Punching power   Tons 60 88 120 185 220
Maximum capacity   ° 1 1/2┐ x 3/8" 1 1/2┐ x 9/16" 1 1/2┐ x 3/4" 1 1/2┐ x 1 1/4" 1 1/2┐ x 1 1/2"
Throat S in 19 5/8" 20" 19 5/8" 20" 20"
  SD in 29 1/2" 29 1/2" 29 1/2" 29 7/8" 31 1/2"
PUNCHING OF SECTIONS WITH GOOSENECK DIE HOLDER              
I on the leg   in 4"- 12" 4"- 12" 4"-17 3/4" 4"-17 3/4" 4"-17 3/4"
I on the web   in 4"-19 5/8" 4"-19 5/8" 4"-19 5/8" 4"-19 5/8" 4"-19 5/8"
U on the leg   in 4"- 12" 4"- 12" 4 3/4" -15 3/4" 4 3/4" -15 3/4" 4 3/4" -15 3/4"
U on the web   in 4 3/4" -10 1/4" 4 3/4" -14 7/8" 4 3/4" -15 3/4" 4 3/4" -15 3/4" 4 3/4" -15 3/4"
GENERAL FEATURES              
Motor power   H.P. 8.5 12 20 27 27
Strokes per minute
(based on 3/4" stroke)
    37 40 28 28 1-1/4"
Maximum stroke   in 2 3/8┐ 2 3/84┐ 3-5/32┐ 3-15/16┐ 3-15/16┐
Woeking height S/SD in 41 3/4" / 31 7/8" 43"/ 47" 39"/ 42" 41 3/4" / 41 3/4" 39 7/8" / 39 7/8"
Net weight S/SD Lbs 2,535 / 4,155 2,415 / 4,665 6,945 / 8,755 9,460 / 9,975 11,465 / 12,125
Gross weight S/SD Lbs 2,910 / 4,630 4,245 / 5,180 7,495 / 9,480 10,365 / 11,025 12,570 / 13,230
Volume S/SD Ft3 128 1/8 / 147 1/4 160 / 207 1/4 196 / 240 7/8 258 1/8 / 316 340 / 353 1/8
Dimensions with seaworthy packaging S in 61"x47"x77" 67"x51"x81" 82"x51"x81" 80"x63"x128" 100"x63"x93"
  SD in 73"x47"x71" 83"x51"x85" 90"x51"x91" 80"x63"x128" 105"x63"x93"
OPTIONAL EQUIPMENT              
Tube notching   in 2 3/8" 2 3/8" 2 3/8" 2 3/8" 2 3/8"
Oversize diameters punching equipment   ° 4"x5/32" 4"x1/4" 4"x3/8" 4"x1/2" 4"x5/8"
<< see in inches
    A B C D E F G H I J K L M N 0 P Q R S
PUMA 55 S 500 340 270 65 55 33 120,5 81 233,5 81 137 25 231 45 327 102 78 185 1060
  SD 750 340 270 65 55 33 120,5 81 233,5 81 137 25 231 45 327 102 78 185 810
PUMA 80 S 510 370 300 65 62 31 123 89 253,5 89 144 25 234 45 304 130 70 234 1094
  SD 750 370 300 65 62 31 123 89 253,5 89 144 25 234 45 304 130 70 278 1194
PUMA 110 S 500 420 350 79 79 40 140,5 96 267 96 161 25 326 47 461 95 125 100 991
  SD 750 420 350 79 79 40 140,5 96 267 96 161 25 326 47 461 95 125 100 1066
PUMA 165 S 510 450 350 85 79 35 158 104 430 160 200 25 372 45 450 - 240 - 1060
  SD 760 450 380 85 79 35 158 104 430 160 200 25 372 45 450 141 98 245 1060
PUMA 220 S 510 450 375 85 79 33 162 100 435 151 198 30 - 30 483 - 330 - 1013
  SD 800 450 375 85 79 33 162 100 435 151 198 30 - 30 483 125 200 216 1013
Sizes in mm
<< see in mm
    A B C D E F G H I J K L M N 0 P Q R S
PUMA 55 S 19 11/16 13 3/8 10 5/8 2 9/16 2 3/16 1 5/16 4 3/4 3 3/16 9 3/16 3 3/16 5 3/8 1 9 1/16 1 3/4 12 7/8 4 3 1/16 7 1/4 41 3/4
  SD 29 1/2 13 3/8 10 5/8 2 9/16 2 3/16 1 5/16 4 3/4 3 3/16 9 3/16 3 3/16 5 3/8 1 9 1/16 1 3/4 12 7/8 4 3 1/16 7 1/4 31 7/8
PUMA 80 S 20 1/16 14 9/16 11 13/16 2 9/16 2 7/16 1 1/4 4 13/16 3 1/2 10 3 1/2 5 11/16 1 9 3/16 1 3/4 12 5 1/8 2 3/4 9 3/16 43 1/16
  SD 29 1/2 14 9/16 11 13/16 2 9/16 2 7/16 1 1/4 4 13/16 3 1/2 10 3 1/2 5 11/16 1 9 3/16 1 3/4 12 5 1/8 2 3/4 10 15/16 47
PUMA 110 S 19 11/16 16 9/16 13 3/4 3 1/8 3 1/8 1 9/16 5 1/2 3 3/4 10 1/2 3 3/4 6 5/16 1 12 13/16 1 7/8 18 1/8 3 3/4 4 15/16 3 15/16 39
  SD 29 1/2 16 9/16 13 3/4 3 1/8 3 1/8 1 9/16 5 1/2 3 3/4 10 1/2 3 3/4 6 5/16 1 12 13/16 1 7/8 18 1/8 3 3/4 4 15/16 3 15/16 42
PUMA 165 S 20 1/16 17 3/4 13 3/4 3 3/8 3 1/8 1 3/8 6 1/4 4 1/16 16 15/16 6 5/16 7 7/8 1 14 5/8 1 3/4 17 3/4 - 9 7/16 - 41 3/4
  SD 29 15/16 17 3/4 14 15/16 3 3/8 3 1/8 1 3/8 6 1/4 4 1/16 16 15/16 6 5/16 7 7/8 1 14 5/8 1 3/4 17 3/4 5 9/16 3 7/8 9 5/8 41 3/4
PUMA 220 S 20 1/16 17 3/4 14 3/4 3 3/8 3 1/8 1 3/8 6 3/8 3 15/16 17 1/8 5 15/16 7 13/16 1 3/16 - 1 3/16 19 - 13 - 39 7/8
  SD 31 1/2 17 3/4 14 3/4 3 3/8 3 1/8 1 3/8 6 3/8 3 15/16 17 1/8 5 15/16 7 13/16 1 3/16 - 1 3/16 19 4 15/16 7 7/8 8 1/2 39 7/8
Sizes in inches

Capacities based on a material resistance of 65,000 tensile.
- The manufacturer reserves the right to make modifications without prior notice 

24.9
180
Anchoring elements
Anchors
Shipyards
Barbeques
Handrails
Boiler-making works
Barbecue
Copper plate
Boiler works
Cranes
Metal carpentry
Dockyards
Metal sheds
Excavators
Farm machinery
Catenary
Truck chassis
Fences and enclosures
Metal constructions
Fires
Metal constructions
Football goalmouth
Furniture elements
Wind energy
Handrails
Cellar equipment
High voltage pylons
Cellar equipment
Loaders
Cellar equipment
Sports equipment
Metal cabins
Tent structures
Metallic constructions
Stand structures
Metallic constructions
Metalwork
Stove
Excavators
Mining
Ironwork
Mining carriages
Cranes
Oil rig
Fittings
Publicity boards
Snow blower
Snow plow
Solar panels
Agricultural machinery
Mine
Sports equipment
Urban furniture
Stand structures
Tent structures
Urban furniture
Shovels
Traffic signs
Copper plate
Trailers
Train pylons
Oil rigs
Truck chassis
Solar panels
Football goals
Tunnel mining
Trailers
Urban furniture
Traffic signs
Urban furniture
High-tension pylons
Weathervanes
Mining tunnels
Windo power
Wine-making equipment
Mining wagons
Wine-making equipment
Billboard
Wine-making equipment
Billboards and fences
Vane
Wrought ironwork
 

  • Semipaxy
    Our Semipaxy product line brings the newest CNC automation and positioning technology to punching of steel. This unit is equipped with programmable stops along the X- and Y-Axis.

  • PAX
    Our PAX product line guarantees the automated positioning of material along the X-Axis permitting sequential multiple punching of profiles.

Related news / Products
  • The best International Machine-Tool Exhibition in recent times

    Last month, from 30 May to 4 June the International Machine-Tool Exhibition (BIEMH) was held at the BEC (Bilbao Exhibition Center) in Bilbao.From first day, our stand was a hive of activity of people interested in our machinery. This year there was an increase in visitors of 13% compared to previous years, when the economic crisis could still be felt...

    info
  • New Bendicrop Models

    We are glad to introduce you new Geka's Bendicrop models (60 S/SD and 85 S). Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the Bendicrop Series.

    info
  • Laser Positioner

    This is an equipment with 2 linear lasers integrated in the punching Stripper. Both laser beams cross in the middle of the die-punch. Therefore, you can lay the piece easily just placing the punching point exactly where the lines cross.

    info
  • SIGMA 110 represents the latest novelty in technology development by GEKA AUTOMATION

    It is a system that allows you to drill beams up to 1m high. SIGMA is fast, powerful and versatile And above all, SIGMA guarantees productivity, comfort and savings, because from now on you will not need the crane to rotate and drill the beam: SIGMA 110 does it all in a single movement!

    info

Copyright ę 2015 Maquinaria GEKA S.A. All rights reserved.
Website developed by DMacroWeb using the tool DM Corporative
Social networks
Technical characteristics valid except for typographical errors or omissions.
Geka group, committed to continuous product improvement, may without notice change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to MenÚame Share on your website
Learn:
Suscribe to newsletter: