Geka Ironworkerswww.geka-ironworkers.com
1
7001
Share

Hydracrop 55,  hydraulic ironworker with 2 work stations.

Versatile and economic punching machine with 2 independent hydraulic cylinders, 2 areas and 5 work stations.

geka cizalla punzonadora hydracrop 55

Two hydraulic cylinders ironworker with two simultaneous work stations and five work stations.

  • Punching (60 Tn power)
  • Notching
  • Shear of iron section L (110 Tn power)
  • Shear of flatbar
  • Cut of round and square bars 

Hyd 80 is suitable for punching profiles and for mounting special equipment.

2 VERSIONS ON EACH MODEL:   S, SD

"S" VERSION

  • Machines driven by two cylinders.
  • 5 work stations, fitted with tools for L, shearing, round and square bars, rectangular notching and punching
  • Quick change punch
  • Flat bar shearing table with adjustable guides
  • 2 simultaneous work stations
  • Greater speed backed by a powerful hydraulic unit.
  • Special equipment for approaching at reduced pressure and slow speed.
  • Precision punching table with X & Y measuring stops.
  • Precision notching table with X & Y measuring stops
  • Ready for production pack comprising:
    • One meter "touch & cut" length stop with fine adjusting.
    • Lamp for enhanced vision of cutting zones.
    • 10 sets of round punches and dies.

"SD" VERSION

  • The same features as the S version, but with a deeper throat for larger plate and sheet metal applications.

info
Angles UPN profile Flat bars H profile
Centering Punching Shearing Punches Shearing 45║ Shearing 45║ Shearing of bars Blending Notching

HYDRACROP 80/150
FEATURES << see in inches
Shears for flatbar 300 x 15 mm
200 x 20 mm
Punching ě 40 x 10 mm.
ě 20 x 20 mm.
Shear of iron section L at 90║ 120 x 120 x 10 mm
Shears for solid bars ě 40 mm Y ┐40 mm
Rectangular notching 90 x 42 x 10 mm
HYDRACROP 80/150
FEATURES << see in mm
Shears for flatbar 12"x5/8"
8"x3/4"
Punching ě 1 1/2"x3/8"
ě3/4"x3/4"
Shear of iron section L at 90║ 5"x5"x1 3/8"
Shears for solid bars
ě 1-9/16" & ┐1-9/16"
Rectangular notching 3 1/2"x1 5/8"x3/8"

 
View Full specifications

<< see in inches
FEATURES     55/110
S, SD
80/150
S, SD
110/180
S, SD
165/300
S, SD
220/300
S, SD
*The first figure indicates metric tons on the punching end.
*The second figure, metric tons on
L-shearing end.
             
SHEARS FOR PROFILES              
Flatbar with slight deformation   mm 300x15 450x15 600x15 750x20 750x20
    mm 200x20 300x20 400x20 400x30 400x30
Length of blade   mm 305 475 605 765 765
Square bar   mm 25 - - - -
Work height   mm 880 850 960 870 870
               
CSHEARS FOR PROFILES              
Shearing powe   kN 1100 1500 1800 3000 3000
L at 90║ shear without deformation   mm 120x120x10 130x130 x13 152x152x13 205x205x18 205 x205x18
L at 45║   mm 70x70x7 70x70x7 70x70x7 70x70 x 7 70x70x7
WITH SPECIAL BLADE              
L at 90║
(shear with slight deformation)
  mm 130x130x13 152x152x13 160x160x16 205x205x25 205x205x25
               
SHEARS FOR SOID BARS              
Round bar °   mm 40 45 50 60 60
Square bar     mm 40 45 50 60 60
WITH SPECIAL BLADES              
UPN Profiles   mm 120 140 160 180 180
IPN Profiles   mm 120 140 160 180 180
               
NOTCHING              
Plate thickness   mm 10 12 13 16 16
L of   mm 100 100 100 120 120
Depth   mm 90 90 90 110 110
Width   mm 42 52 52 58 58
               
PUNCHING              
Punching Power   kN 550 800 1100 1650 2200
Maximum capacity with quick change   mm ° 40x10 ° 40x14 ° 40x20 ° 40x30  
and die with gooseneck die holder   mm ° 20x20 ° 24x24 ° 28x28 ° 34x34 ° 40x40
Throat depth  S mm 250 300 300 510 385
Throat depth  SD mm 500 500 610 610 475
Stroke   mm 60 70 80 100 100
Work height   mm 1085 1095 1165 1110 1110
               
GENERAL SPECIFICATIONS              
Punch stroke per minute
(based on 20 mm travel)
    37 40 28 31 26
 Motor:   kW 5 9 9 15 15
Approx. net weight with production pack S Kg 1390 2070 2750 5200 5900
  SD Kg 1750 2400 3300 6300 7000
Gross weight S Kg 1598 2323 3162 5980 6785
  SD Kg 2012 2760 3795 7245 8050
Packaging dimensions S m 1,67x1,16x2,09 2,13x1,20x2,05 2,13x1,20x2,20 2,83x1,60x2,20 2,88x1,60x2,40
  SD m 2,10x1,16x2,09 2,31x1,2x2,05 2,69x1,4x2,20 2,95x1,60x2,20 3,04x1,60x2,40
Volume of maritime packing S m3 4,04 4,72 5,62 10 11,06
  SD m3 5,09 6,68 8,28 10,38 11,67
<< see in mm
FEATURES     55/110
S, SD
80/150
S, SD
110/180
S, SD
165/300
S, SD
220/300
S, SD
*The first figure indicates metric tons on the punching end.
*The second figure, metric tons on
L-shearing end.
             
SHEARS FOR PROFILES              
Flatbar with slight deformation   in 12" x 5/8" 18" x 5/8" 24" x 5/8" 30" x 3/4" 30" x 3/4"
    in 8" x 3/4" 12" x 3/4" 16" x 3/4" 16" x 11/8" 16" x 11/8"
Length of blade   in 12" 18 11/16" 24" 30 1/8" 30 1/8"
Square bar   in 1" - - - -
Work height   in 345/8" 331/2" 3713/16" 341/4" 341/4"
               
CSHEARS FOR PROFILES              
Shearing power   ton 110 150 180 300 300
L at 90║ shear without deformation   in 4 3/4"x4 3/4"x 3/8" 5 1/8"x 5 1/8" x 1/2" 6"x 6" x 1/2" 8"x 8" x 3/4" 8"x 8" x 3/4"
L at 45║   in 2 3/4"x2 3/4"x1/4 2 3/4"x2 3/4"x1/4 2 3/4"x2 3/4"x1/4 2 3/4"x2 3/4"x1/4 2 3/4"x2 3/4"x1/4
WITH SPECIAL BLADE              
L at 90║
(shear with slight deformation)
  in 5 1/8"x5 1/8"x1/2" 6"x6"x1/2" 6 1/4"x6 1/4"x 5/8" 8"x8"x1" 8"x8"x1"
               
SHEARS FOR SOLID BARS              
Round bar °   in 1 5/8" 13/4" 2" 23/8" 23/8"
Square bar     in 1 5/8" 13/4" 2" 23/8" 23/8"
WITH SPECIAL BLADES              
UPN Profiles   in 4 3/4" 5 1/2" 6 1/4" 7" 7"
IPN Profiles   in 4 3/4" 4 3/4" 6 1/4" 7" 7"
               
NOTCHING              
Plate thickness   in 3/8" 1/2" 1/2" 5/8" 5/8"
L of   in 4" 4" 4" 4 3/4" 4 3/4"
Depth   in 31/2" 31/2" 31/2" 4 3/8" 4 3/8"
Width   in 15/8" 2" 2" 2 1/4" 2 1/4"
               
PUNCHING              
Punching Power   ton 60 88 120 185 240
Maximum capacity with quick change   in ° 11/2"x 3/8" ° 11/2"x 9/16" ° 11/2"x 3/4" ° 11/2"x11/4"  
and die with gooseneck die holder   in ° 3/4"x 3/4" ° 1"x1" ° 1 1/8"x1 1/8" ° 1 3/8"x1 3/8" ° 11/2"x11/2"
Throat depth S in 10" 12" 12" 20" 15"
Throat depth SD in 19 3/4" 19 3/4" 24" 24" 183/4"
Stroke   in 23/8" 23/4" 3 1/8" 4" 4"
Work height   in 42 3/4" 43" 457/8" 433/4" 433/4"
               
GENERAL SPECIFICATIONS              
Punch stroke per minute
(based on 3/4" travel)
    37 40 28 31 26
Motor:   H.P. 8.5 12.5 12.5 20 20
Approx. net weight with production pack S lbs 3,065 4,565 6,060 11,465 13,010
  SD lbs 3,860 5,300 7,275 13,890 15,435
Gross weight S lbs 3,525 5,125 6,975 13,185 14,960
  SD lbs 4,435 6,085 8,370 15,975 17,750
Packaging dimensions S in 653/4"x455/8"x821/4" 833/4"x471/4"x 803/4" 833/4"x471/4"x865/8" 1111/2"x63"x865/8" 1133/8"x63"x941/2"
  SD in 825/8"x455/8"x821/4" 91"x471/4"x 803/4" 106"x55"x865/8" 116"x63"x865/8" 1193/4"x63"x941/2"
Volume of maritime packing S ft3 1421/2 1665/8 1981/2 3531/8 3905/8
  SD ft3 1793/4 2357/8 2921/2 3661/2 4121/8

Capacities based on a material resistance of 65,000 tensile
- The manufacturer reserves the right to make modifications without prior notice

 

Punching station dimensions

<< see in inches
    A B C D E F G H I K L M N O P Q R S
HYDRACROP 55 S 254 350 280 65 57 33 120,5 81 233,5 137 25 208 35 233 72 268 125 1066
  SD 508 350 280 65 57 33 120,5 81 233,5 137 25 208 35 233 99 110 170 1066
HYDRACROP 80 S 305 370 300 65 64 31 123 89 253,5 144 25 234 45 304 120 250 120 1094
  SD 510 370 300 65 64 31 123 89 253,5 144 25 234 45 304 130 70 225 1094
HYDRACROP 110 S 305 395 325 79 81 40 140,5 96 267 161 25 256 45 311 120 275 120 1151
  SD 610 395 325 79 81 40 140,5 96 267 161 25 256 45 311 150 72 260 1151
HYDRACROP 165 S 510 450 380 85 79 47 158 104 322 200 25 369 45 450 160 80 160 1110
  SD 610 450 380 85 79 47 158 104 322 200 25 369 45 450 150 100 260 1110
HYDRACROP 220 S 385 470 400 85 79 47 158 104 322 200 25 372 45 450 35 350 35 1090
  SD 475 470 400 85 79 47 158 104 322 200 25 372 45 450 85 300 85 1090
Dimensions in mm.
<< see in mm
    A B C D E F G H I K L M N O P Q R S
HYDRACROP 55 S 10 13 3/4 11 2 9/16 2 1/4 1 5/16 4 3/4 3 3/16 9 3/16 5 3/8 1 8 3/16 1 3/8 9 3/16 2 13/16 10 9/16 4 15/16 41 15/16
  SD 20 13 3/4 11 2 9/16 2 1/4 1 5/16 4 3/4 3 3/16 9 3/16 5 3/8 1 8 3/16 1 3/8 9 3/16 3 7/8 4 5/16 6 3/4 42
HYDRACROP 80 S 12 14 9/16 11 13/16 2 9/16 2 1/2 1 1/4 4 13/16 3 1/2 10 5 11/16 1 9 3/16 1 3/4 12 4 3/4 9 13/16 4 3/4 43 1/16
  SD 20 1/16 14 9/16 11 13/16 2 9/16 2 1/2 1 1/4 4 13/16 3 1/2 10 5 11/16 1 9 3/16 1 3/4 12 5 1/8 2 3/4 8 7/8 43 1/16
HYDRACROP 110 S 12 15 9/16 12 13/16 3 1/8 3 3/16 1 9/16 5 1/2 3 3/4 10 1/2 6 5/16 1 10 1/16 1 3/4 12 1/4 4 3/4 10 13/16 4 3/4 45 5/16
  SD 24 15 9/16 12 13/16 3 1/8 3 3/16 1 9/16 5 1/2 3 3/4 10 1/2 6 5/16 1 10 1/16 1 3/4 12 1/4 5 15/16 2 13/16 10 1/4 45 5/16
HYDRACROP 165 S 20 1/16 17 3/4 14 15/16 3 3/8 3 3/8 1 7/8 6 1/4 4 1/16 12 11/16 7 3/4 1 14 1/2 1 3/4 17 3/4 6 5/16 3 1/8 6 5/16 43 11/16
  SD 24 17 3/4 14 15/16 3 3/8 3 3/8 1 7/8 6 1/4 4 1/16 12 11/16 7 3/4 1 14 1/2 1 3/4 17 3/4 5 15/16 3 1/8 10 1/4 43 11/16
HYDRACROP 220 S 15 3/16 18 1/2 15 3/4 3 3/8 3 3/8 1 7/8 6 1/4 4 1/16 12 11/16 7 3/4 1 14 5/8 1 3/4 17 3/4 1 3/8 13 3/4 1 3/8 42 15/16
  SD 18 11/16 18 1/2 15 3/4 3 3/8 3 3/8 1 7/8 6 1/4 4 1/16 12 11/16 7 3/4 1 14 5/8 1 3/4 17 3/4 3 3/8 11 13/16 3 3/8 42 15/16
Dimensions in inches.

 

 

24.9
180
Anchoring elements
Anchors
Shipyards
Barbeques
Handrails
Boiler-making works
Barbecue
Copper plate
Boiler works
Cranes
Metal carpentry
Dockyards
Metal sheds
Excavators
Farm machinery
Catenary
Truck chassis
Fences and enclosures
Metal constructions
Fires
Metal constructions
Football goalmouth
Furniture elements
Wind energy
Handrails
Cellar equipment
High voltage pylons
Cellar equipment
Loaders
Cellar equipment
Sports equipment
Metal cabins
Tent structures
Metallic constructions
Stand structures
Metallic constructions
Metalwork
Stove
Excavators
Mining
Ironwork
Mining carriages
Cranes
Oil rig
Fittings
Publicity boards
Snow blower
Snow plow
Solar panels
Agricultural machinery
Mine
Sports equipment
Urban furniture
Stand structures
Tent structures
Urban furniture
Shovels
Traffic signs
Copper plate
Trailers
Train pylons
Oil rigs
Truck chassis
Solar panels
Football goals
Tunnel mining
Trailers
Urban furniture
Traffic signs
Urban furniture
High-tension pylons
Weathervanes
Mining tunnels
Windo power
Wine-making equipment
Mining wagons
Wine-making equipment
Billboard
Wine-making equipment
Billboards and fences
Vane
Wrought ironwork
 

  • Semipaxy
    Our Semipaxy product line brings the newest CNC automation and positioning technology to punching of steel. This unit is equipped with programmable stops along the X- and Y-Axis.

  • PAX
    Our PAX product line guarantees the automated positioning of material along the X-Axis permitting sequential multiple punching of profiles.

  • ALRS
    The ALRS product line is an automated feeder of flat bar, available as part of an option package for our HYDRACROP (except 55 tons model) shearing stations.

Related news / Products
  • The best International Machine-Tool Exhibition in recent times

    Last month, from 30 May to 4 June the International Machine-Tool Exhibition (BIEMH) was held at the BEC (Bilbao Exhibition Center) in Bilbao.From first day, our stand was a hive of activity of people interested in our machinery. This year there was an increase in visitors of 13% compared to previous years, when the economic crisis could still be felt...

    info
  • New Bendicrop Models

    We are glad to introduce you new Geka's Bendicrop models (60 S/SD and 85 S). Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the Bendicrop Series.

    info
  • Laser Positioner

    This is an equipment with 2 linear lasers integrated in the punching Stripper. Both laser beams cross in the middle of the die-punch. Therefore, you can lay the piece easily just placing the punching point exactly where the lines cross.

    info
  • SIGMA 110 represents the latest novelty in technology development by GEKA AUTOMATION

    It is a system that allows you to drill beams up to 1m high. SIGMA is fast, powerful and versatile And above all, SIGMA guarantees productivity, comfort and savings, because from now on you will not need the crane to rotate and drill the beam: SIGMA 110 does it all in a single movement!

    info

Copyright ę 2015 Maquinaria GEKA S.A. All rights reserved.
Website developed by DMacroWeb using the tool DM Corporative
Social networks
Technical characteristics valid except for typographical errors or omissions.
Geka group, committed to continuous product improvement, may without notice change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to MenÚame Share on your website
Learn:
Suscribe to newsletter: