Geka’s single cylinder punching and shearing machines can be used by one worker in up to four working stations for punching, notching, shearing flat bars and cutting angles. Geka’s one-cylinder punching and shearing machines include three different series of Geka ironworker—the Microcrop Series, the Minicrop Series, and the Multicrop Series—all of which can perform punching, notching, cutting and shearing operations.
Each series carries different models that vary in punching power and other specifications. Additionally, Geka ironworkers’ one-cylinder punching and shearing machines can also be factory-fitted with certain optional accessories. This makes it easy to suit our punching and shearing machines to your specific manufacturing requirements.
Geka Single Cylinder Punching and Shearing Machine Models
Microcrop Punching and Shearing Machines
Geka’s Microcrop one-cylinder punching and shearing machines are equipped with three working stations for punching, cutting and shearing.
Minicrop Punching Machines
The models in Geka’s Minicrop Series of punching and shearing machines feature four working stations for punching, notching, shearing flat bars, angles and round and square bars.
Multicrop Punching Machines
The Multicrop Series of punching machines packs similar features to Geka’s but with an added angle shearing station for shearing angles at 45º leg in and leg out.
MAIN FEATURES OF GEKA’S ONE-CYLINDER PUNCHING MACHINES
| FEATURES | MICROCROP 36 | MINICROP 45 | MULTICROP 45 |
|---|---|---|---|
| Punching power | 36 Ton | 45 Ton | 45 Ton |
| Maximum capacity | Ø 28×10 mm | Ø 28×12 mm | Ø 28×12 mm |
| Flat Bars Shearing | 350×6 mm 200×13 mm | 300×10 mm 200×13 mm | 300×10 mm 200×13 mm |
| Angle cut 90º | 80x80x8 mm | 80x80x8 mm | 80x80x8 mm |
| Angle cut 45º | 50x50x6 mm | – | 60x60x6 mm |
| Notching | – | 60x50x7 mm | 60x50x7 mm |
- Capacities based on a material resistance of 45 Kg/mm2.
- GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
- Technical characteristics valid except for typographical errors or omissions.